Get Connected

Fill the form below to receive a personalized consultancy by our expert team.


Teltonika Eye Sensor (BTSMP1) | BLE Sensor Australia

Home/Teltonika Eye Sensor (BTSMP1) | BLE Sensor Australia

Teltonika Eye Sensor (BTSMP1) | BLE Sensor Australia

The Teltonika Eye Sensor (BTSMP1) is a small Bluetooth sensor that reports temperature, humidity, movement and door open/close status. It has no GPS, so it pairs with a compatible Teltonika tracker and sends its readings into Fleet Mate.

Asset 12

30-Day Risk Free Return

Asset 40

Lifetime Support

GST Included in the Price

A$10 AU Post Express Shipping (For capital cities and major areas)

A$10 - Au Post - Regular Shipping (For rural areas)

$46.00

Recommended - Optional

Add a SIM pre-configured service

Simple, affordable plans with reliable coverage and instant activation. No ID checks & no lock-in contracts.

FleetMate Pre-Configured SIM Card for 4G GPS Trackers – Australia-Wide Coverage
Note - Designed for GPS trackers only.

Cameras/video are not supported.

Quick facts

Question Answer
What is it? A Bluetooth sensor made by Teltonika, model BTSMP1
Does it have GPS? No. The compatible tracker supplies the location
What else do I need? A compatible Teltonika tracker with Bluetooth
What does it measure? Temperature, humidity, movement, pitch/roll and magnet status
Where do I see the data? In Fleet Mate through the connected Teltonika tracker

What the Teltonika Eye Sensor does

The Eye Sensor is a Bluetooth Low Energy (BLE) sensor designed to monitor conditions around a trailer, vehicle, asset or piece of equipment.

It measures temperature, humidity, movement and magnet status. A nearby compatible Teltonika tracker receives those readings, adds its own location and time information, and sends the data to Fleet Mate.

The Eye Sensor itself does not contain GPS or a cellular modem. The Teltonika tracker acts as the gateway between the sensor and Fleet Mate.

At 56.6 x 38 x 13 mm and 18 g, it is small enough to mount inside trailers, storage areas, equipment compartments or near doors and hatches. There is no external wiring, SIM card or routine charging.

What it measures

Reading What you get Typical use
Temperature Temperature readings from the sensor Refrigerated trailers, cold storage and temperature-sensitive loads
Humidity Relative humidity readings Dry goods, storage areas and humidity-sensitive cargo
Movement Movement status, movement count, pitch and roll information Equipment and asset movement monitoring
Magnet status Detects whether a configured magnet is present or removed Trailer doors, hatches and open/close monitoring

The standard operating and temperature measurement range is -20 °C to +60 °C. Humidity can be reported from 0% to 100%.

How it works

Step What happens
1. Fit it Place the sensor where conditions need to be monitored, such as inside a refrigerated trailer, equipment compartment or beside a door.
2. Tracker listens A compatible Teltonika tracker scans for the Eye Sensor over Bluetooth.
3. Sensor reports The sensor broadcasts its configured temperature, humidity, movement and magnet-status readings.
4. Fleet Mate receives the data The tracker combines the sensor information with its own location and time records and sends the supported data to Fleet Mate.

Works with these Teltonika trackers

Tracker Good for
FMC003 Plug-in OBD tracking for compatible cars and light vehicles
FMC920 Compact hardwired vehicle tracking
FMC130 Advanced installations requiring additional inputs and outputs
FMC150 Vehicle tracking with integrated CAN data capabilities

Not sure whether your Fleet Mate tracker supports the Eye Sensor? Send us the tracker model and we can confirm the suitable setup.

Contact Us

Cold chain and refrigerated transport

Need How the Eye Sensor helps
Monitor load temperature on the road Temperature and humidity readings can be received by the vehicle’s Teltonika tracker and associated with its location and time.
Know where a reading occurred The gateway tracker provides the location information associated with the sensor data sent to Fleet Mate.
Monitor trailer doors A magnet can be installed with the Eye Sensor so changes in magnet presence can represent door open and close events.

The standard Eye Sensor is useful for operational temperature monitoring. Where certified temperature records are required for a specific regulatory or cold-chain process, the applicable requirements should be checked before deployment.

Where people use it

Use What the sensor does
Refrigerated trailers and vans Monitors temperature and humidity
Trailer doors and hatches Reports changes in magnet status for open/close monitoring
Equipment and tools Reports movement and movement count
Storage and warehouses Monitors conditions where installing wired sensors is impractical

Eye Sensor vs Eye Beacon vs ATEX

Eye Sensor Eye Beacon ATEX Eye Sensor
Sends an ID Yes Yes Yes
Temperature and humidity Yes No Yes
Movement and magnet detection Yes No Yes
Best for Cold chain, doors and equipment monitoring Trailers, tools and driver identification Sensor monitoring in suitable hazardous environments
ATEX certified No No Yes
Needs a gateway tracker Yes Yes Yes

Good to know before you buy

Point Detail
Gateway needed The Eye Sensor has no GPS or cellular connection of its own. A compatible Teltonika tracker provides location and sends its readings onward.
Movement monitoring The accelerometer reports movement information. It does not physically prevent an asset from being moved.
Bluetooth range Up to 80 metres in open-air conditions. Vehicle bodies, metal, walls and other obstructions can reduce practical range.
Only need identification? If temperature, humidity, movement and magnet readings are not required, the Teltonika Eye Beacon provides Bluetooth identification without the additional sensing functions.

Specifications

Spec Detail
Model Teltonika BTSMP1
Technology Bluetooth Low Energy
Bluetooth Bluetooth 4.2 compliant, Bluetooth 5.2 certified
Protocols iBeacon, Eddystone, Teltonika EYE
Measures Temperature, humidity, movement, pitch/roll and magnet status
Temperature range -20 °C to +60 °C
Humidity 0% to 100% non-condensing
Bluetooth range Up to 80 m in open-air conditions
Battery 600 mAh lithium manganese dioxide
Default battery life 4+ years at 2 dBm transmission power and a 5-second advertising interval
Water and dust rating IP67
Operating temperature -20 °C to +60 °C
Dimensions 56.6 x 38 x 13 mm
Weight 18 g
Setup Teltonika EYE App over Bluetooth

Battery life by setting

Setting at 2 dBm Battery life
Signal every 3 seconds 2.5+ years
Signal every 5 seconds — default 4+ years
Signal every 10 seconds 5+ years

Battery life depends on configuration and operating conditions. Faster advertising intervals allow more frequent detection but use more battery, while longer intervals extend expected battery life.

Setting it up

  1. Open the Teltonika EYE App and connect to the Eye Sensor over Bluetooth.
  2. Identify the sensor and configure the required readings and advertising interval.
  3. Add the Eye Sensor to the Bluetooth sensor configuration of the compatible Teltonika tracker.
  4. Associate the sensor with the relevant trailer, vehicle, compartment, door or asset in Fleet Mate.
  5. Once the gateway tracker receives the Bluetooth readings, it sends the supported sensor data together with its own tracking information to Fleet Mate.

Compatible Fleet Mate tracking hardware includes the FMC003 OBD2 GPS Tracker, FMC920 Professional GPS Tracker, FMC130 Advanced GPS Tracker and Teltonika FMC150 GPS Tracker.

Contact Us

Eye Sensor FAQ

What does the Eye Sensor measure?
It measures temperature, humidity, movement and magnet status. Its accelerometer can also provide movement count, pitch and roll information.

Does the Eye Sensor have GPS?
No. The Eye Sensor does not determine or transmit its own GPS location. A compatible Teltonika tracker acts as the gateway and provides the location.

Do I need a GPS tracker?
Yes, when using the Eye Sensor with Fleet Mate. A compatible Bluetooth-enabled Teltonika tracker receives the sensor readings and sends them to Fleet Mate together with its own tracking information.

Can I use it in a refrigerated trailer?
Yes. Temperature and humidity monitoring are common Eye Sensor applications. The standard sensor operates from -20 °C to +60 °C, so the required temperature range should be checked against the intended load and environment.

How do I detect a door opening?
Install the Eye Sensor and a suitable magnet so the magnetic field changes when the door opens or closes. The sensor can then report magnet presence or absence through the compatible gateway tracker.

Eye Sensor or Eye Beacon?
Choose the Eye Beacon when only Bluetooth identification is required. Choose the Eye Sensor when temperature, humidity, movement or magnet-status readings are also needed.

How long does the Eye Sensor battery last?
Teltonika specifies 4+ years at the default 5-second advertising interval, 2.5+ years at 3 seconds and 5+ years at 10 seconds.

Is the Eye Sensor waterproof?
The Eye Sensor is rated IP67 for dust and water ingress protection when used within the manufacturer’s specified conditions.

Does the Eye Sensor work with Fleet Mate?
Yes. A compatible Teltonika tracker acts as the Bluetooth gateway. It receives the Eye Sensor data and sends the supported readings together with the tracker’s location and time information to Fleet Mate.

Contact Us

Additional information